White Industries G30 Gravel Cranks

White Industries G30 Gravel Cranks

The G30 is part of our 30mm spindle line of cranks which also includes the M30, A30 and R30 models. The “G” stands for gravel and the “30” is for the 30mm spindle. Made here in our shop, the G30 draws on over 30 years of crank manufacturing experience with a focus on all the White Industries hallmarks; functionality, durability, and clean design. The best way to describe this model is, “It’s a White Industries road bike crank with a slightly wider Q factor.”

The G30 uses our M30 mountain crank arms mounted to our R30 road spindle so you get road/gravel chainlines but with a bit wider Q factor as well as more room between your crank arms and chainstays. It is a direct replacement for most road and gravel cranks from the big “S” companies but with a lot more options: two crank arm colors, eight extractor cap colors, three 1x chainlines, a 2x chainring option, and six crank arm lengths. Like we said, options!

• Spindles are 30mm diameter
• Arms and spindles made in our shop from 2024-T365 aluminum
• Black anodized or polished silver (not anodized)
• Extractor caps
  • Anodized aluminum: black, blue, gold, pink, purple, red, and silver
  • Bronze (actually made out of bronze)
• Lengths
  • 155mm, 160mm, 165mm, 170mm, 172.5mm, and 175mm
• Weight
  • 570g (175mm length w/spindle)

Tools

• Crank arm mounting bolts
  • Torque wrench (min 40 ft lbs or 54 Nm)
  • 10mm hex bit socket
• Chainring lockring
  • Park BBT-22 or Shimano BBT-32
• Bearing preload collar
  • 1.5mm hex key
• Extractor cap
  • Park SPA-2 pin spanner with .090”/2.3mm pins (this is the red one)

Torque

• Chainring lockring: 30 ft lbs (40 Nm)
• Crank arms: 35-40 ft lbs (48-54 Nm)
  • We recommend retorquing arms after the first ride
• Bearing preload collar bolt: ¼ turn past snug (more may crack the collar)
• Extractor caps: As tight as feels comfortable without the pin spanner slipping out of the holes