Sprockets and Cogs

Shimano Track Cog Dura-ace Shimano Track Cog Fixed Gear 12-22T. Steel. Imported. When you need every watt to go into the wheels, no name is as trustworthy as Dura-Ace. Their track cog threads onto standard 1.37" x 24 TPI track hubs and is available...

Profile Racing Imperial Gear 41t-46t Profile Racing Imperial Gear Features:BMX Chainwheel CNC machined from billet aluminum - Designed for 3-Piece cranksets with 19mm spindles.• Bore is 22mm, sold with adapter.• Available in: 41T-46TOther sizes...

Profile Racing Imperial Gear 31t-40t The Profile Racing Imperial Gear Features: BMX Chainwheel CNC machined from billet aluminum - Designed for 3-Piece cranksets with 19mm spindles.• Bore is 22mm, sold with adapter.• Available in:...

Profile Racing Chainring Profile Racing Chainring 5 bolt 110bcd Sprocket. Last One. Features:• CNC machined from aircraft quality billet aluminum plate.• Fanned Design. NOTE: Sizes below 42T do not have scalloped design because of size...

Eclat Vent Sprocket 25t 1/8 The all new Vent sprocket is made using 8mm thick 6061-T6 aluminum plus hard anodized finish to make it strong. The center bore is 22mm and it is supplied w/ an adapter for 19mm spindles. The adapter and 22mm washer are...

Eclat Tilt CNC Sprocket 25t 1/8The Tilt Sprocket is CNCd from 7075-T6 aluminum and features 3 rotation points adaptors for 19mm 22mm spindles and a hard anodized finish for added strength.

Eclat Channel 19 S.D. SprocketMaterial: 6061-T6 alloy full CNC w/ heat treated Spline Drive CrMo insert. Thickness: 8mm. Spindlebore: 19mm or 24mm. Features: heat treated 48 spline CrMo insert that fits on 19mm or 24mm spindle specificly hollow CNC...

GT Overdrive BMX Sprocket GT Overdrive Sprocket for BMX and Freestyle Bikes.  CNC Machined quality BMX Gear. Includes 19mm center hole adapter.Sizes: 25T, 28T, 33T, 36TBlack with Silver or All Silver 3/32" Teeth and can be used on 3/32" or 1/8" wide...

Merritt Ackerman Sprocket The Merritt Ackerman Sprocket is a quality designed BMX Freestyle front gear. Its used primarily with a 9T gear gear on freestyle bikes that have a oversize 14mm rear axle. This sprocked is available in several colors and its...

PROFILE SPLINE DRIVE SPROCKET USA Made BMX Parts This is the PROFILE SPLINE DRIVE SPROCKET for 19MM axle typeSpline drive gears alloy you to get better chain alignment because there is no sprocket bolt that sometimes warps your gear when you tighten it...

Phil Wood Track Cog Phil Wood Track Cog Fixed Gear 12-22T. High Polished aluminum. USA Made

Profile Track Cog The Profile Track Cog is Thread Cogs for Fixed Gear hubs. Available in 13-20 tooth sizes, 3/32" and 1/8" sizes TRACK/FIXED COGS -Thread on Cogs for Fixed Gear hubs – 1.375″ X 24  thread -Cogs are CNC machined from...