BSD Soulja V3 Frame

BSD Soulja V3 Frame

Built for battle! Dan Paley's signature Soulja frame is a favourite with street riders, featuring a 75.2 degree headangle, 8.8” standover, a super responsive 12.8 – 13.2” rear end and invest cast dropouts with built in chain tensioners.

Key Features:

• Dan Paley signature
• Sanko Japanese seamless 4130 CrMo tubing
• Invest Cast Dropouts:
• The dropout is cast as one piece, much stronger than a plate welded to a tube. 7mm thick to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails, also the dropout is heat treated before welding making it extra tough. And finally there are integrated chain tensioner bolts inside.
• Integrated Seatclamp: The seatclamp is built into the frame so there's no need for a separate clamp. This keeps the frame clean and simple while also allowing the seat to be slammed lower. Also the slot cut beneath the seatclamp gives more clamping power less torque on the bolt.
• Invest Cast Seatstay Bridge: We've used a heat treated chromoly invest cast seatstay bridge on the Jonesin’ frame which creates a stronger and more rigid rear end. Also because it's invest cast we were able to add a debossed Jonesin' graphic onto it, neat huh?

Specification:

Top Tube Lengths: 20.6", 20.9", or 21.2"
Head Tube Angle: 75.2°
Seat Tube Angle: 71°
Chainstay Length: 12.8-13.2"
BB Height: 11.7"
Standover height: 8.8"
Weight: 5lbs.
Brake mounts: None (Brakeless)