20" Threaded Retro bmx 1" Fork Black

20" CrMo BMX with 3/8" dropouts Generic Replacement Style.
The threaded Steerer tube is 7 1/4" long and the threading starts at 3 1/4" from the crown race and threads up to the top. This is plenty of threading need for most old school BMX frames. The is a tool to help you cut the threaded tube down to size. Its the Park SG-1. It hold the fork steady (you need a Vice) while you but through it with a hack saw. The SE Landing Gear 1" x 20" has a 5 1/2" total steerer tube length just for your reference. The Langing Gear fork weights 1lbs 15.4oz.
•Strong machined CrMo steel upper
•Hi tensile steel legs
•Oversized 1-3/8" diameter legs
•6mm wide dropout tabs
•1" Threaded
•185x100mm
The fork legs have a little sticker that says SAE 4130 CR-MO TUBE
There is a hole drilled for a front side pull brake.
•Black
2lbs and 10.2oz