Volume Thrasher Frame

Volume Thrasher Frame V2

The Volume Thrasher Frame Features:

The V2 Thrasher came into development after hearing what our riders/ critics wanted. Longer top tube lengths on the smaller sized frames for less overlap, steeper head tube for better handling, allow a bigger tire and a lil’ taller BB for certain tricks. The aesthetics are very simple and straight forward. Double butted, seamless, heat treated CRO-MO Sanko tubes were used throughout the frame. If you like a very straight forward frame that can take abuse but still ride like a normal bike, the all new Thrasher V2 is for you.
Note: With the all new steeper HT, we do recommend using a 420 or more axle to crown fork for proper clearance.

• Geometry: S / M / L /
• Frame Sizes: S / M / L / XL Seat Tube Height (mm): 470 / 500 / 530 / 560
• Top Tube Lengths (inches): 22.6, 23.4, 24 and 24.8
• Chainstay Length (inches): 16
• Head tube Angle: 75°
• Seat Tube Angle: 74°
• Dropout thickness (mm): 5mm
• 14mm Dropouts
• Seatpost Dia. (mm): 27.2
• Seat Tube O.D. (mm): 29.8
• Headset Type: 1-1/8″ Threadless. Integrated, 42.0 OD bearings 45°X45° (Hiddenset)*
• B.B. Shell Width (mm): 68
• B.B. Thread Type: MID (BMX Specific) B.B. Shell Inner Diameter (mm): 41.25
• B.B Height (inches): 14.4
• Rear Hub Spacing (mm): 120
• Wheel Size: 700C
• Tire Compatibility: 700X50c or 26X1.95
• Stand-Over Height (inches): 31.75, 53: 32.5 and 33.25
• Material: Full Heat Treated 100% CR-MO tubing
• Frame Weight (lb): S: 6 lbs 11 oz., / M: 6 lbs 13 oz., / L: 6 lbs 16 oz. / XL: 7 lbs 3 oz.

Colors:

Flat Black, Raw w/ Matte Clear over
Stickers are the same on both colorways

We also sell Resits BMX Partsl like the cranks and forks.

The wait was well worth it, everything about these frames looks solid, clean welds, a head tube gusset and nice paint, top these bad boys off. Combine that with fixed freestyle specific geometry and you have everything you need for some sick barspins. Now you just need to look for a sweet vintage cycling hat.