TNT Revolver Classic 1st Gen Hubs

NOS TNT Revolver Hubset 1st Generation

The TNT Revolver Hubset is American Made by TNT. These TNT Hubs are NOT Flip flop like the standard Revolver hubs are. You can install a 16t and larger freewheel on these 1st Generation hubs. The Flip Flop TNT Hub allows for a 14 and larger freewheel because one side of the hub has a smaller flange thread-on area for a smaller freewheel.

ACE Note: The hub machining on this hub is drilled all the way through on the front and on the rear, but the rear in not drilled all the way through on the freewheel side. The TNT Flip Flop hub drilling does not go all the way through on front or the rear of the hubset. 

The small flange hub called the TNT Derringers were one of the very best BMX hubs in the 1980s and now you can also get them today!
Pair Sealed 36 or 28H.
Call us for custom wheel building or order what you need on line.
Type a note in order comments and we will calculate your spoke length for you!
We also have the TNT Revolver and Expert Cassette and 20mm Front hubs and the Pro cassette!

If you want colored axle nuts make a note in order comments.

If you build on 20" Sun Rhyno Lites use 188mm Front and 186mm Rear spokes 3 cross pattern. The hub machining on this hub is drilled all the way through on the front and on the rear, but the rear in not drilled all the way through on the freewheel side.