Description
SE Racing PK Ripper Vans Looptail
The SE Vans PK Ripper Looptail 21"TT BMX Freestyle Bike-Red is a limited edition, individually numbered collaboration featuring a "Vans Edition" aluminum alloy frame with Floval tubing and a looptail rear. With primary colors, a healthy dose of chrome, and a Vans checkerboard padset you might just think you're riding around in 1988!
FEATURES
- Vans edition 6061 aluminum PK Ripper frame w/ floval tubing, looptail rear end, seatstays wrap, Diamond Dropouts
- Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- Full Cr-Mo "Off the Wall" Landing Gear forks
- Cr-Mo Power Wing bars
- Vans x Cult Grips with rubber SE end plugs
- Vans x Cult 20" x 2.1" Tires
- Double-wall rims with sealed bearing SE Mohawk hubs
- Vans Checkerboard Padset, '66 Dice Valve Caps, Alloy Rear Wheel Washers
- 24 pounds
SPECIFICATIONS
- FRAME: Vans Edition, 6061 Aluminum Floval Tubing, Looptail Rear End, Seatstays Wrap, Retro Diamond Shape Dropouts, 68mm American Bottom Bracket, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
- FORK: "Off the Wall" Landing Gear, Full Cr-Mo
- CRANKSET: SE TSC Cranks, 180mm, Sealed Bearing American Bottom Bracket, 141mm Spindle Length, 19mm Spindle Diameter, Alloy Spider, 44T Alloy Chainring
- PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
- CHAIN: KMC Z6
- WHEELSET: Sealed Bearing SE Mohawk Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
- TIRES: Vans x Cult Tires, All Over Tread Design, Vans Waffle Sole Pattern, 20" x 2.1" Front & Rear
- BRAKESET: Tektro C-310 V-Brake, Slick Cable
- BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
- HEADSET: Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
- HANDLEBAR: Cr-Mo Power Wing, 29" x 8.25", 10° Backsweep, 1° Upsweep
- STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
- GRIPS: Vans x Cult Grips, Waffle Sole Pattern, Made in USA
- BRAKESET: Tektro C-310 V-Brake, Slick Cable
- BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
- HEADSET: Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
- HANDLEBAR: Cr-Mo Power Wing, 29" x 8.25", 10° Backsweep, 1° Upsweep
- STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
- GRIPS: Vans x Cult Grips, Waffle Sole Pattern, Made in USA
- SEAT: SE Racing Old School
- SEATPOST: Micro-Adjust Alloy, 27.2mm
- SEAT CLAMP: SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
- ACCESSORIES: Vans Checkerboard Padset, '66 Dice Valve Caps, Alloy Rear Wheel Washers
- WEIGHT: 24 lbs / 10.86 kgs
GEOMETRY
- TOP TUBE, ACTUAL: 21"
- SEAT TUBE, CENTER TO TOP: 10.2"
- SEAT TUBE ANGLE: 71°
- HEAD TUBE ANGLE: 74°
- CHAINSTAY LENGTH: 14.75"
- WHEELBASE: 37.7"
- BOTTOM BRACKET HEIGHT: 11.7"
- STANDOVER: 22.5"
- SUGGESTED RIDER SIZE: 5'3"+ (160cm+)
- STEM: 55mm
- HANDLEBAR WIDTH: 28.5"
- CRANK: 180mm
- WHEEL SIZE: 20"
- SEAT POST DIAMETER: 27.2mm
Complete Bike specifications and components may differ from photos and description. Manufacturers reserve the right to make changes and/or substitutions due to parts availability, production requirements and ongoing development decisions.