Description
SE Racing OM Flyer 26 2022 in Root Beer. Limited Edition
SE Racing OM Flyer 26 Description and Specs
A staple in BMX for nearly as long as the sport has been in existence, the 26” OM Flyer was originally designed by and named after SE’s founder, Scot “Old Man” Breithaupt. With its blue colorway mixed in with bits of brown and the camouflage pads, this bike captures the essence of BMX’s past four decades. It’s built to last with a retro-styled 4130 butted Cr-Mo frame featuring a classic looptail rear end. Long live the OM!
- Full Cr-Mo retro OM Flyer frame design with looptail rear end
- Full Cr-Mo Cowboy Cut forks
- Cr-Mo Big Honkin’ cruiser bars
- SE 3-pc V-Ridge cranks with SE aluminum SE spider and SE chainring
- Double-wall rims with sealed bearing high-flange hubs
- Authentic ODI Mushroom II grips
- Fluted micro-adjust seat post
- Vee Tire x SE Racing Cub 26” x 2.0 tires
- SE Racing Rad Plate
- SE Racing Lightning Bolt snap padset
- 29.6 lbs
Suggested Rider Size:
5’3”+ (160cm+)
Color(s):
SE Blue
Frame:
100% Cr-Mo Tubing, Butted Top Tube & Down Tube, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
Fork:
Landing Gear, Full Cr-Mo
Crankset:
SE V-Ridge 3-pc Cr-Mo Cranks, 180mm, Sealed Bearing American Bottom Bracket, SE Star Spider, 150mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
Pedals:
Wellgo Low-profile Platform
Chain:
KMC S1
Wheelset:
Sealed Bearing SE Mohawk Flip Flop Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 14T Freewheel, Stainless Spokes
Tires:
SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 26” x 2.4” Front & Rear
Brakeset:
Tektro 855AL V-Brake, Slick Cable
Brake Levers:
Tektro 316A, 2-Finger Alloy
Headset:
Tange 1-1/8” Threadless
Handlebar:
Cr-Mo Power Wing Cruiser Bar, 28” x 7”, 10° Backsweep, 1° Upsweep
Stem:
Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
Grips:
Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ 45 Years of Radness SE Donuts
Seat:
SE Flyer Seat w/ Custom SE Bottle Opener Brace
Seatpost:
Micro-Adjust Alloy, 25.4mm
Seat Clamp:
SE Racing Champ Clamp, Alloy, 28.6mm Inner Diameter
Accessories:
45 Years of SE Radness Snap Padset, Alloy Valve Caps, SE Wheelie Pegs, SE Cable Clips
Weight:
32.9 lbs / 14.92 kgs
**Specifications are subject to change without notice.**
GEOMETRY
Description | Size 1 | Size 2 | Size 3 | Size 4 | |
---|---|---|---|---|---|
A | Top Tube, Actual | 22.1" | |||
B | Seat Tube, Center To Top | 15" | |||
C | Seat Tube Angle | 73° | |||
D | Head Tube Angle | 71° | |||
E | Chainstay Length | 17.4" | |||
F | Wheelbase | 42" | |||
G | Bottom Bracket Height | 12" | |||
H | Standover | 28.1" | |||
Stem | 55mm | ||||
Handlebar Width | 29" | ||||
Crank | 180mm | ||||
Wheel Size | 26" | ||||
Seat Post Diameter | 25.4mm |