Old School BMX Parts Kit to build your Late Model Frame and Fork

Introduction: We have been in the Mail Order Business since the early 1980s supplying parts world wide. Remember Wes BMX? They were just across the river and we both helped to fuel the freestyle boom with bikes and parts. Many parents now who rode BMX in the mid 1980s are returning to riding again and building bikes for their kids. This custom parts kit will help you get it done right without searching and clicking all over the web. The picture is an old vintage Free Agent build we did that has many of the same parts on this kit.

This is an Old School Parts kit with all the parts you need to build up and Old School BMX Frame form the 1980s and 1990s. It fits frames that take a 1" threaded headset and 3/8" drop outs. Also, the brakes are side pull style like the used to be. Note: If you need a 1" threaded Fork we do sell them, made by Redline. In the comments section of order form type Black or White for Tuff wheels. Type straight or laidback for seatpost. Type 175mm or 180mm for crank length on the 3pc cranks.

Front End
8" Chromoly HandleBars
Alloy Shafted Stem Silver
Tioga Bear Trap 2 1" Threaded Headset chrome
Ame Tri Old School Grips

Drive Train (see options)
1pc Chromoly Cranks
Tioga Bear Trap 2 unsealed BB
1pc 44T Sprocket
or
GT 175mm Power Series Cranks Chrome
Profile American BB
Profile Imperial 44T Polished Sprocket
or
Redline Flight Cranks 180mm Chrome
Redline Flight Sprocket 44T
Redline American Bottom Bracket Sealed
with
Victor Alloy Round 9/16" Pedals Unsealed Black Cage Silver Body
Izumi Chrome/Nickel 1/8" BMX Chain

Wheels (see options below)
Skyway Tuff Wheels
or
Alloy 36H Alex unsealed with 3/8" axles silver
16T Freewheel
Tioga Comp 3 Copy 1.75 Rear
Tioga Comp 3 Copy 2.125 Front
2 Inner Tubes
2 Rim Strips if you choose Alloy Spoke Wheels

Brake System
DiaCompe Rear Bulldog Black Side Pull
Diatech MX 99 Right BMX Lever
Black Brake Cable with Housing
Cable end crimp

Cockpit
Plastic SE Racing Lightning Bolt Kashimax Style seat black
Standard Seat Guts Clamp
Chromoly Seat Post Straight or Laidback chrome
Alloy 1" Seat Post Clamp

Tools Needed:
Park Cable Cutter CN-10
Park Headset and BB Cup press HHP-3
Air Pump
8mm Box Wrench
10mm Box Wrench
15mm Box Wrench
Large Adjustable Wrench for Headset
Allen Wrench Set
Phil Wood Bearing Grease
Park CT-7 Chain Breaker
Hair Spray for Grips
Park Repair Stand PSC-9 (not required)

Use this as your sizing guide for old school bike building, because its all correct.