Description
Freewheel Remover FR-1
The Freewheel Remover FR-1 tool is the most common for multi speed bikes with a threadon freewheel. If you have a cassette with a lockring you need a cassette removal tool and chain whip tool.
- 12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5–10 speed freewheels
- The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles
- Base of tool can be used with a 1" socket or wrench
- Loosens in a counterclockwise direction and usually requires lots of torque to remove.
- Its better to not remove tire when removing a freewheel.
- Also use your quick release skewer to hold the tool on whel you break it free to preven slippage if needed. Remove quick release to thread freewheel the rest of the way off
- You may need to use a pipe to extende your wrenchs leverage.
Related Products
Odyssey 13T Freewheel Remover
Odyssey BMX
$9.99
Odyssey 13t Freewheel Remover
Has four prongs that fit a 13T freewheel.
FR-5 Cassette Tool
Park Tools
$7.95
Park FR-5.2 Cassette Tool
Park FR-5.2 Cassette Tool. Lossens or tightens the lock ring that holds your single or multi gear on tight. you also need a chain whip tool like the park HCW-16 or figure...
Park BMX Freewheel Remover Tool FR-6
Park Tools
$17.95
Park BMX Freewheel Remover
Park BMX Freewheel Remover BMX Freewheel Remover Tool FR-6
The Freewheel Remover Tool can remove most 4 prong type freewheels.
Fits over 14mm Axles.
You should not need to...
Excess BMX Freewheel Remover Tool
$11.99
Removes the Excess Brand freewheel from your hub. It helps to have a vice and or a long wrench for the needed torque.Bike Mechanic Notes:Small same as ACS CrossfireBig Same as 4 Prong
ACS Crossfire freewheel Remover new
ACS BMX
$19.99
ACS Crossfire freewheel Remover new
This is the ACS Crossfire Freewheel Tool to loosen your ACS Crossfire Freewheel. Freewheels need no tool to install since it simply threads on to your threaded hub...