ACS Crossfire freewheel Remover new

ACS Crossfire freewheel Remover new

This is the ACS Crossfire Freewheel Tool to loosen your ACS Crossfire Freewheel. Freewheels need no tool to install since it simply threads on to your threaded hub. This tool fits over both 3/8" or 14mm axles. You can use a crescent wrench to turn your freewheel tool counterclockwise to loosen. It usually takes some leverage to get the loose. You may be able to thread your axle nut over the tool so it wont slip inter the torque. A vise can also be used to hold the tool while you turn the wheel counter clockwise. The Crossfire replaces the ACS Claws freewheel.

Check the Excess freewheel tool if you need a 16T or larger crossfire freewheel removed. Its 8 Spline.

Unique 6 Spline