Description
Park Chain Tool
This small Park chain tool goes anywhere and actually performs like a shop quality tool. Chain tools are often used to shorten the stock chain length of replacement chains. You do not need to use a master link when using this tool, but you can if you choose to.
Park Tool CT-5
- The fine thread, special V-shaped handle, and strong replaceable pin make chain removal and installation a breeze
- Works on all chains including 10-Speed
- Perfect take-along chain tool at only 77 grams
- Handy "loosening shelf" to remedy stiff links after reassembly
- Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick
Related Products
FR-5 Cassette Tool
Park Tools
$7.95
Park FR-5.2 Cassette Tool
Park FR-5.2 Cassette Tool. Lossens or tightens the lock ring that holds your single or multi gear on tight. you also need a chain whip tool like the park HCW-16 or figure...
Bully Half Link Chain
Bully USA
$39.99
Bully Half Link Chain
DESCRIPTION:
The Bully Half Link Chain features:
- Square Riveting
- DHA Chromium Hardened Pin
MCS Hollow Pin Chain BMX 3/32"
Crupi BMX
$29.99
MCS Hollow Pin Chain
The MCS Hollow Pin Chain is super light and not too pricey. 3/32" only. Fit 3/32 chainrings only. You need a chain breaker tool to cut this to the size you need. Most all chains...
Demolition Royal Park Fork
Demolition
$139.99
Order Demolition Royal Park ForkLight Weight Park ForkFull
Park BMX Freewheel Remover Tool FR-6
Park Tools
$17.95
Park BMX Freewheel Remover
Park BMX Freewheel Remover BMX Freewheel Remover Tool FR-6
The Freewheel Remover Tool can remove most 4 prong type freewheels.
Fits over 14mm Axles.
You should not need to...