The LiL’ Ripper rips hard! With an alloy frame with Looptail rear end, Landing Gear forks, 6061 alloy cranks, and a micro adjust alloy seatpost, this year’s LiL’ Ripper is the baddest little bike on the block.
6061 Aluminum Floval Tubing, Euro Bottom Bracket, Looptail Rear End
LiL’ Landing Gear
SE 3-pc 6061 Alloy, 140mm Euro-Sealed Bearing, 36T
FPD Alloy Platform, Cr-Mo Axle
SE Racing Alloy 32H Hubs w/ Alex C1000 rims, 16T Freewheel
Kenda K-Rad 16” x 2.125” F & R
Promax Mini V-Brake
Promax 2-Finger Alloy
Tange 1-1/8” Threadless
SE Wing Bar, 21” x 5.5”
SE Racing Top-Load Alloy w/ Weight-Saving Cutouts
SE Slim Seat w/ Custom Cover
Race Rocker Micro-Adjust Alloy, 27.2mm
Race Plate, Pads
18.80lbs / 8.52kgs
**Specifications are subject to change without notice.**
Description Size 1 Size 2 Size 3 Size 4
Top Tube, Actual 16.5"
Seat Tube, Center To Top 7.7"
Seat Tube Angle 70°
Head Tube Angle 72°
Bottom Bracket Height 9.8"
Seat Post Diameter 27.2mm
Suggested Rider Size Under 5' (Under 152cm)
**Geometry is subject to change without notice.**